Sharp MX-3610N User Manual page 1161

Number of Times to Recall When Line is Busy
This setting specifies whether or not recalling is performed when the line is busy. When
recalling is performed, you can set the number of recall attempts.
Interval to Wait Between Recall Attempts (min.) When Line is Busy
The interval between recall attempts can be set.
The number of recall attempts and the interval between attempts that can be set in each
country are shown in the following table.
Country Differentiation Table
United Kingdom, France,
Germany, Sweden, Italy,
Spain, Netherlands, Saudi
Arabia, South Africa,
Hungary, Czech, Republic,
Slovakia, Poland, Greece,
Russia
Canada
Australia, New Zealand,
Singapore, Thailand,
Malaysia, India, Philippines
Hong Kong
Taiwan
Indonesia
When this setting is enabled, note that your machine will not re-attempt a call when
manual transmission or direct transmission is used.
Recall in Case of Communication Error
This determines how many times your machine will automatically re-attempt the call if a fax
transmission fails due to a communication error.
Number of Times to Recall in Case of Error
Specify how many times the machine will re-attempt the call when a communication error
occurs.
The number of recall
attempts
1 to 10
(default: 2)
1 to 14
(default: 2)
1 to 9
(default: 2)
1 to 3
(default: 2)
1 to 15
(default: 2)
1 to 5
(default: 2)
The interval between
attempts
any number of minutes from 1
to 15
(default: 3)
any number of minutes from 4
to 15
(default: 4)