SETTING MODE
PAPER TYPE REGISTRATION
Store a paper type when the desired paper type does not appear as a selection or when you
wish to create a new set of paper properties.
Up to 7 paper types can be registered.
Item
Type Name
Fixed Paper Side
Disable Duplex
Disable Staple
Disable Punch
The settings that can be selected vary depending on the peripheral devices
installed.
Index
Description
Register any name.
The factory default names are "User Type 1"
to "User Type 7".
Enable this setting when paper with a front
and reverse side is used.
Enable this setting when paper is loaded that
cannot used for 2-sided printing.
Enable this setting when paper is used that
cannot be stapled.
Enable this setting when paper is used that
cannot be punched.
Contents
MX-2610N / MX-3110N / MX-3610N