Sharp MX-3610N User Manual page 1192

TROUBLESHOOTING
THE IMAGE IS TOO LIGHT OR TOO DARK
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the image too light?
Is the image too dark?
Has an appropriate exposure mode for the
original type been selected?
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Select an appropriate exposure mode
for the original being copied and
adjust the exposure level manually.
Select one of the following modes
depending on the original type.
Text
Use this mode for regular text
documents.
Text/Printed Photo
This mode provides the best balance for
copying an original which contains both
text and printed photographs, such as a
magazine or catalogue.
Text/Photo
This mode provides the best balance for
copying an original which contains both
text and photographs, such as a text
document with a photo pasted on.
Printed Photo
This mode is best for copying printed
photographs, such as photos in a
magazine or catalogue.
Photo
Use this mode to copy photos.
Map
MX-2610N / MX-3110N / MX-3610N