Sharp MX-3610N User Manual page 1154

Memory Box Name
Sub Address/Passcode
Items displayed when storing a confidential memory box
Print PIN
Items displayed when storing a relay broadcast memory box
Recipients
When programming a new memory box, a sub-address that is already
programmed for another box cannot be used. However, the same passcode can
be used for more than one memory box.
[ ] and [#] cannot be used in a sub-address.
A passcode can be omitted.
Do not forget the Print PIN. In the event that you forget the Print PIN or need to
verify the Print PIN, contact your dealer or nearest authorised service
representative.
Index
data. The sub-address and passcode that you program in
the memory box are necessary for the other machine to
send a fax to the machine by F-code relay request
transmission.
Enter a name (maximum of 18 characters) for the memory box.
Enter a sub-address and passcode. A maximum of 20 digits can
be entered for each sub-address and passcode.
Separate a sub-address and passcode by a slash ("/").
Set a "Print PIN" for confidential reception. Enter a 4-digit
number.
Select the end recipients of the relay broadcast. Select the
recipients from the address book.
Select the recipient from the address book: Selects an
address from the address book.
Destination Entry: An address that is not stored in the
address book can be directly entered. Enter the address in
the same way as when storing an address for a mode.
Address Review: This displays a list of the selected
recipients. Addresses can be deleted from this list if needed.
Contents