Sharp MX-3610N User Manual page 1040

SETTING MODE
INITIAL STATUS SETTINGS
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just the
copy function).
The copier settings are reset to the initial state when the [Power] button is turned on, when the
[CA] key is tapped, or when the auto clear interval has elapsed. These settings are used to
change the default settings for copy mode.
The following settings can be changed:
Item
Colour Mode
Paper Tray
Exposure Type
Copy Ratio
2-Sided Copy
Output
Return to the Defaults
Index
Description
Configure default colour mode settings.
Specify the paper tray that is selected by default.
Configure default exposure mode settings.
Specify the copy ratio that is selected by default.
Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex
function to any setting other than "1-Side to 1-Side" and the
duplex function or automatic document feeder fails or is disabled,
the setting will revert to "1-Side to 1-Side".
Set the print output method and output tray that are selected by
default.
This returns all items to the factory default settings.
Contents
MX-2610N / MX-3110N / MX-3610N