Sharp MX-3610N User Manual page 1208

TROUBLESHOOTING
PART OF THE IMAGE IS CUT OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Does the paper size specified by the job
match the size of paper loaded into the tray?
Is the print orientation setting (portrait or
landscape) correct?
Are the margins set correctly in the layout
settings of the application?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Make sure that the paper size setting
matches the size of paper loaded
into the tray.
Windows: The setting is selected in the [Paper
Select] tab of the printer driver.
If [Fit To Paper Size] is selected, check the
loaded paper and the paper size setting.
Macintosh: The setting is selected in the
[Page Setup] menu.
(In Mac OS 9.0 to 9.2.2, the setting is
selected using the [Page Setup] menu.)
Set the print orientation to match the
image.
Windows: The setting is selected in the [Main]
tab of the printer driver.
Macintosh: The setting is selected in the
[Page Setup] menu.
(In Mac OS 9.0 to 9.2.2, the setting is
selected using the [Page Setup] menu.)
Select an appropriate paper size and
margins in the layout settings of the
application.
If the edge of the image extends outside the
printable area of the machine, the edge will be
cut off.
Contents
MX-2610N / MX-3110N / MX-3610N