Sharp MX-3610N User Manual page 1043

When this setting is enabled and paper is loaded into a tray while the machine is on standby in
copy mode, that tray is automatically selected.
Prohibition of Custom Image Registration
Disables storage of a custom image.
Prohibit utilize sending function at copy
Disables the Image Send function during copy.
B/W 600 dpi x 600 dpi Scanning Mode for Document
Feeder
The resolution for copying in black and white using the automatic document feeder can be
changed from 600 x 400 dpi to 600 x 600 dpi (high quality mode).
When high quality mode is used, fine print and thin lines are reproduced with greater clarity,
however, the scanning speed is slower.
When high quality mode is not selected, the following conditions must be satisfied
in order to scan at 600 x 400 dpi and attain the fastest speed.
The copy ratio must be set to 100%.
Do not select a special mode that will change the ratio.
[Copy of Copy] must not be enabled.
Do not copy in black and white with the [Colour Start] key.
B/W Quick Scan from Document Glass
The resolution for copying in black and white using the document glass can be changed from
600 x 600 dpi to 600 x 300 dpi (high speed mode).
When high speed mode is selected, the first copy time is quicker, however, the copy image is
not as clear.
When high quality mode is not selected, the following conditions must be satisfied
in order to scan at 600 x 300 dpi and attain the fastest speed.
The copy ratio must be set to 100%.
Do not select a special mode that will change the ratio.
[Copy of Copy] must not be enabled.
Do not copy in black and white with the [Colour Start] key.
Auto Clear Before Copy Job
Enables the Auto Clear function during copy even when a copy job is not completed. This
protects the machine from being held due to the incomplete copy job.
Index Contents