Sharp MX-3610N User Manual page 1087

SETTING MODE
QUICK SETTINGS
Select the minimum required settings for the machine connection to the network.
Network Name Settings
Device Name
Enter a device name.
Domain Name
Enter the domain name.
DNS Settings
Primary Server
Enter the IP address of primary DNS server.
Secondary Server
Enter the IP address of secondary DNS server.
Domain Name
Enter the domain name where the selected DNS server exists.
SMTP Settings
Primary Server
Enter the IP address or the host name of the primary SMTP server.
Source Address
If data transmission has failed, the undelivered e-mail may be returned from the server. Enter
an e-mail address (a single address only) to receive such undelivered mails. Usually, enter the
e-mail address of system administrator.
Enable SSL
If the SSL is enabled, the SMTP-over-TLS encryption communication can be used by
STARTTLS command.
This requires the server to support the STARTTLS command.
To allow SSL communication, set the "Port Number" to the same port number as the normal
SMTP.
MX-2610N / MX-3110N / MX-3610N