Sharp MX-3610N User Manual page 1041

SETTING MODE
COPY SETTINGS
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just the
copy function).
Copy Exposure Adjustment
Adjusts the exposure level when [Auto] is used for the copy exposure.
Colour
Sets the copy exposure level in colour mode for the document glass and for the automatic
document feeder.
B/W
Sets the copy exposure level in black & white mode for the document glass and for the
automatic document feeder.
Rotation Copy Setting
When the original and paper are placed in different orientations, this function automatically
rotates the image 90 degrees to enable correct copying on the paper.
Enable the Rotation Copy setting to copy an A5 (5-1/2" x 8-1/2") size original on
A5R (5-1/2" x 8-1/2"R) paper.
Add or Change Extra Preset Ratios
Add two enlargement preset ratio values (101% to 400%) and two reduction preset ratio values
(25% to 99%).
Also, you can change the preset ratio if necessary.
Preset ratios other than added preset ratios cannot be changed.
Setting a Maximum Number of Copies
This is used to set the maximum number that can be entered for the number of copies
(number of continuous copies). Any number from 1 to 999 can be specified.
Initial Margin Shift Setting
This is used to set the default margin shift amount. Specify a value from 0 mm (0") to 50 mm
(2") in increments of 3 mm (1/8") for both the front and reverse sides.
MX-2610N / MX-3110N / MX-3610N