Sharp MX-3610N User Manual page 1062

Send Setting
These settings are used to configure the settings for Internet fax.
I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent.
I-Fax Reception Report Request Timeout Setting
The duration of time that the machine will wait for a reception report from the destination
machine can be set by any number from 1 hour to 240 hours in increments of 1 minute.
This setting is only effective when "I-Fax Reception Report On/Off Setting" is
enabled.
Number of Resend Times at Reception Error
The number of resend attempts when an error message is received from an I-Fax recipient can
be set to any number from 0 to 15.
This setting is only effective when "I-Fax Reception Report On/Off Setting" is
enabled.
Maximum Size of E-mail Attachments
To prevent the transmission of excessively large image files by Internet fax, a file size limit can
be set from 1 MB to 10 MB in increments of 1 MB. If the total size of the image files created by
scanning the original exceeds the limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
This setting is linked to "Maximum Size of E-mail Attachments (E-mail)" in Scan
Settings.
Rotation Sending Setting
When transmitting an image that is one of the following sizes, this function rotates the image
90 degrees counterclockwise. (The setting can be configured separately for each size.)
A4, B5R, A5R, 8-1/2"x11", 5-1/2"x8-1/2"R, 16K
A4R and 8-1/2" x 11"R size images are not rotated.
Printing Page Number at Receiver
When the transmitted image is printed by the receiving machine, the page number can be
added to the top of each printed page.
Recall in Case of Line Busy
(This setting is only effective for Direct SMTP transmission.)