Sharp MX-3610N User Manual page 1102

SETTING MODE
LDAP SETTINGS
The following explains the LDAP settings.
When you tap the [Store] key, the LDAP settings are updated with your entries.
The default address book is set to
LDAP Settings
Set this option to use LDAP.
Add
Tap the [Add] key for addition.
Delete
To delete an item, select it and tap the [Delete] key.
Settings
Item
Name
Default Address Setting
LDAP Server
Server Type
User ID Property
LDAP Search Property
E-mail Address Search
I-Fax Address Search
Fax Number Search
Search Open Key
Pages Limit Group
Authority Group
.
Description
Enter the address book name.
Enters the search defaults to search for a specific area of the
LDAP directory information tree.
Example: o = ABC, ou = NY, cn = Everyone
Entries must be separated by semicolons or commas.
Enter the IP address or host name of the LDAP server.
Select the Default or Custom from the service type list. The
default setting is Default.
Set the user ID property. The default setting is "uid".
Set the LDAP search property. The default setting is "cn".
Set the e-mail address search. The default setting is "mail".
Set the Internet Fax address search. The default setting is "mail".
Set the fax number search. The default setting is
"facsimileTelephoneNumber".
Sets the open key search. The default setting is "userCertificate".
Set the Storing Page Limit Group Search. The default setting is
"pagelimit".
Set the Storing Authority Group Search. The default setting is
"authority".
MX-2610N / MX-3110N / MX-3610N