Sharp MX-3610N User Manual page 1011

SETTING MODE
TRAY SETTINGS
Paper tray and paper type settings are explained in this section.
These settings specify the paper type, paper size, and functions allowed for each paper tray.
When the [Tray Settings] key is tapped, a list appears showing the trays and the current
settings.
Auto Tray Switching
When a tray runs out of paper during printing, this determines whether or not another tray with
the same size and type of paper is automatically selected and printing continues.
Settings of each tray
When the [Change] key is tapped, the corresponding setting screen appears.
The following settings can be configured.
Item
Type
Size
Feeding Approved Job
Description
Select a type of paper to be loaded into the
tray.
The paper types that can be selected vary by
paper tray. For more information, see "Tray
Settings".
To user type setup, see "PAPER TYPE
REGISTRATION".
Select the paper size from the list. The paper
sizes that can be selected vary by tray. The
sizes that can be selected may also be
restricted by the paper type selected above.
For more information, see "Tray Settings".
If the desired size does not appear in the list,
select [Custom Size] and directly enter the
size (only for the bypass tray). For more
information, see "Tray Settings".
Select the modes that can be used. If there is
a function that you do not wish to be used
with the selected tray, disable the function.
When the "Type" is other than plain paper,
recycled paper, coloured paper, or a user
type, [Fax] and [Internet Fax] cannot be
selected.
MX-2610N / MX-3110N / MX-3610N