Sharp MX-3610N User Manual page 1272

TROUBLESHOOTING
SMUDGES APPEAR ON PRINTED OUTPUT
Point to check
Are you using paper that is not within the
specifications?
Are you printing on pre-punched paper?
Does a message appear indicating the need
for maintenance?
Index
Solution
Use SHARP-recommended paper.
Using paper that is for other models or special
paper that is not supported may result in
misfeeds, creases, or smudges.
- "SUPPLIES" in "Quick Start Guide"
Take care that the image does not
overlap the punch holes.
If the printed image overlaps the punch holes,
smudges may appear on the reverse side of
the paper following 1-sided printing, or on
both sides following 2-sided printing.
Contact your dealer or nearest
authorised service representative as
soon as possible.
Contents
MX-2610N / MX-3110N / MX-3610N