Sharp MX-3610N User Manual page 1194

TROUBLESHOOTING
COLOURS ARE OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Did you perform "Registration Adjustment"?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Ask your administrator to perform
"Registration Adjustment".
"Setting mode" → [System Settings] →
[Device Control] → [Registration Adjustment
"Execute"] button.
If the colour tones are off, perform [Auto
Colour Calibration] after finishing registration
adjustment. (If the colours are still off after
calibration, repeating calibration may improve
the results.)
"Setting mode" → [System Settings] → [Copy
Settings] → [Colour Adjust] → [Auto Colour
Calibration]
Contents
MX-2610N / MX-3110N / MX-3610N