Sharp MX-3610N User Manual page 1220

TROUBLESHOOTING
PRINTING DOES NOT TAKE PLACE AFTER RECEPTION
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Does a message appear in the display
instructing you to add toner or paper, or to
take some other actions? (Printing is not
possible when this screen appears.)
Does a password entry screen appear?
Has cut-off printing been disabled in the
setting mode (administrator)?
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Restore printing capability as
instructed by the message.
Enter the correct password using the
numeric keys.
[Hold Setting for Received Data Print] is
enabled. If you do not know the password,
check with your administrator.
"Setting mode" → [System Settings] → [Image
Send Settings] → [Operation Settings] →
[Default Settings] → [Hold Setting for
Received Data Print]
Load the same size of paper as the
received fax.
If [Print Actual Size Cut off Disabled] is
enabled in [Print Style Setting] in the setting
mode (administrator) and a fax is received
that is larger than any paper that is loaded,
the fax will be received and stored in memory
without being printed. (However, when a fax
longer than A3 (11" x 17") size is received, it
will be printed using multiple sheets of paper.)
"Setting mode" → [System Settings] → [Image
Send Settings] → [Fax Settings] → [Receive
Settings] → [Print Style Setting]
MX-2610N / MX-3110N / MX-3610N