Sharp MX-3610N User Manual page 1219

TROUBLESHOOTING
TRANSMISSION DOES NOT BEGIN AT THE SPECIFIED TIME
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the machine's clock set to the correct time? Set the clock to the correct time.
Is a transmission in progress?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
"Setting mode" → [System Settings] →
[Default Settings] → [Clock Adjust]
If another transmission is in progress when
the specified time arrives, the timer operation
will begin after that transmission is finished.
Contents
MX-2610N / MX-3110N / MX-3610N