Sharp MX-3610N User Manual page 1217

TROUBLESHOOTING
THE TRANSMITTED FAX PRINTS OUT BLANK AT THE
RECEIVING SIDE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the original placed face up or face down
correctly?
If the receiving machine is using thermal
paper, was the thermal paper loaded with the
wrong side out?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Place the original again in the
correct orientation, and resend.
When using the document glass, the original
must be placed face down. When using the
automatic document feeder, the original must
be placed face up. Place the original correctly
and send the fax again.
Check with the operator of the other
machine.
Contents
MX-2610N / MX-3110N / MX-3610N