Sharp MX-3610N User Manual page 1281

TROUBLESHOOTING
STAPLING DOES NOT TAKE PLACE (INCLUDING SADDLE
STITCH)
Point to check
Does a message appear instructing you to
check the staple unit?
Does a message appear instructing you to
add staples?
Is a different width of paper mixed in?
Are there more sheets than can be stapled at
once?
Is a paper size that cannot be stapled
included in the print job?
Is the paper type setting of the tray selected
in the printer driver set to a paper type that
cannot be stapled?
Have functions been disabled by the
administrator?
Solution
Remove jammed staples.
- "REMOVING STAPLE JAMS" in
"TROUBLESHOOTING"
Replace the staple cartridge.
Do not forget to replace the staple case.
- "REMOVING STAPLE JAMS" in
"TROUBLESHOOTING"
To perform mixed size stapling, use
paper of the same width and select
the [Same Width] setting.
Stapling is not possible when paper of
different widths are mixed together. When
copying, select [Same Width] for [Mixed Size
Original] in [Other].
For the maximum number of sheets
that can be stapled, see
"SPECIFICATIONS" in Quick Start
Guide.
For the paper size that can be
stapled, see "SPECIFICATIONS" in
Quick Start Guide.
Check the paper type settings in the machine
and select a tray that has paper that can be
*
. Click the [Details] button in
used for stapling
[Paper Selection] on the [Paper Select] tab of
the printer properties window and check the
paper type setting of each tray.
* Stapling is not possible on labels, tab paper,
transparency film, or envelopes. In addition, if
"Disable Staple" is selected in the user type,
stapling will not be possible.
Check with your administrator.
Some functions may have been disabled in
the setting mode.
MX-2610N / MX-3110N / MX-3610N