Sharp MX-3610N User Manual page 1258

TROUBLESHOOTING
A FILE NAME IS CUT OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Was the file name stored in the advanced
transmission settings during a scan or Internet
fax transmission?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
If the name was stored in the advanced
transmission settings before Quick File or File
settings were configured, that name will be
used for the stored file. If the number of
characters in the name exceeds the maximum
number of characters allowed for a Quick File
name (30 characters), characters after the
30th character will be discarded.
Contents
MX-2610N / MX-3110N / MX-3610N