Sharp MX-3610N User Manual page 1203

TROUBLESHOOTING
A TRAY, FINISHER, OR OTHER PERIPHERAL DEVICE
INSTALLED ON THE MACHINE CANNOT BE USED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Have the peripheral devices that are installed
on the machine been configured with the
printer driver?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Open the printer properties dialog
box and click the [Auto
Configuration] button on the
[Options] tab.
(Windows)
If auto configuration cannot be
executed, see the Software Setup
Guide.
Contents
MX-2610N / MX-3110N / MX-3610N