Sharp MX-3610N User Manual page 1048

SETTING MODE
INTERFACE SETTINGS
Settings related to the printer function can be configured.
These settings are used to control and monitor data transmitted to the USB port or network
port of the machine.
Hexadecimal Dump Mode
This function is used to print the print data from a computer in hexadecimal format together
with the corresponding ASCII text. This mode allows you to check whether or not print data
from the PC is being transmitted to the printer correctly.
Example of a hexadecimal dump
I/O Timeout
The I/O timeout can be set to any number of seconds from 1 to 999.
The I/O timeout function temporarily breaks the connection if the set duration of time elapses
without any data being received by the port. After the connection is broken, the port is set to
auto selection or the next print job is begun.
Enable USB Port
Enables printing from the USB port.
USB Port Emulation Switching
If the machine is connected using the USB port, select the emulated printer language.
The following settings can be configured.
Auto
*
Post Script
PCL
* When the PS3 expansion kit is installed.
The settings are the same as those of "Network Port Emulation Switching".
Unless printer errors occur frequently, it is recommended that you use the factory
default setting "Auto".
MX-2610N / MX-3110N / MX-3610N