Sharp MX-3610N User Manual page 1190

TROUBLESHOOTING
2-SIDED COPYING DOES NOT TAKE PLACE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Does the paper type setting of the selected
tray specify a type of paper that cannot be
used for 2-sided copying?
Are you using a special size or type of paper? For the paper types and sizes that can be
Are you copying using settings that do not
allow 2-sided copying?
Have functions been disabled by the
administrator?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Check "Tray Settings" in the setting mode.
If the [Disable Duplex] checkbox is selected,
2-sided copying using that tray will not be
possible. Change the paper type setting to a
type that can be used for 2-sided printing.
Set [System Settings] → [Paper Tray Settings]
→ [Tray Settings] → [Disable Duplex] to
"Setting mode".
used for two-sided copying, see
"SPECIFICATIONS" in Quick Start Guide.
2-Sided Copy can generally be combined with
other modes as required, however, some
combinations are not possible. If a prohibited
combination is selected, a message will
appear in the touch panel.
Some functions may have been disabled in
the setting mode. Check with your
administrator.
When user authentication is enabled, the
functions that you can use may be restricted
in your user settings. Check with your
administrator.
Contents
MX-2610N / MX-3110N / MX-3610N
in