Sharp MX-3610N User Manual page 1036

finisher malfunctions.
Saddle Stitch Position Adjust
This setting is used to adjust the staple position (saddle fold position) when a saddle finisher is
installed and the saddle stitch function is used.
The value can be adjusted in increments of 0.2 mm within a range of +/-5.0 mm from the home
position of each paper size.
Disabling of Punch
This setting is used to prohibit the use of punch, such as when the punch module of finisher or
saddle finisher malfunctions.
Disabling of Colour Mode
(When a colour-related problem has occurred)
When a colour-related problem has occurred and printing is not possible, the use of colour
mode will be temporarily blocked. Black & white printing will still be possible.
This function is only for use as an emergency measure. Once this setting is
enabled, only a service technician can cancel the setting. Promptly contact your
dealer or nearest authorised service representative listed in the Quick Start Guide
to have a service technician cancel the settings and resolve the problem.
Auto Paper Selection Setting
*
The paper types that the Auto Paper Selection function will select can be specified. Select one
of the following settings:
Plain Paper
Plain and Recycle Paper
Recycle Paper
The Auto Paper Selection function will not select any paper types other than the paper types
specified with this setting.
The paper type set for each paper tray by selecting [System Settings] in "Setting mode" → [Paper Tray
*
Settings].
Tandem Connection Setting
When two machines are used as network printers using TCP/IP protocol, use this setting to