Sharp MX-3610N User Manual page 1210

TROUBLESHOOTING
THE IMAGE IS UPSIDE DOWN
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Are you using a type of paper (tab paper,
punch paper, etc.) that can only be loaded in
a fixed orientation?
Is the correct binding position selected for 2-
sided printing?
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Rotate the image 180 degrees before
printing.
When the image size and paper size are the
same but the orientations are different, the
orientation of the image is automatically
rotated to match the paper. However, when
the paper can only be loaded in a fixed
orientation, the image may be printed upside
down. In this event, rotate the image 180
degrees before printing.
Windows: The setting is selected in the [Main]
tab of the printer driver.
Macintosh (OS X 10.3.9 to 10.5.1): The
setting is selected using the [Page Setup]
menu. (Landscape orientation only)
(In Mac OS 9.0 to 9.2.2, the setting is
selected in the [PostScript Options] menu of
the [Page Setup] menu.)
Be sure to set the appropriate
binding position.
When 2-sided printing is performed, every
other page is printed upside down when tablet
binding is selected for the binding position.
Windows: The setting is selected in the [Main]
tab of the printer driver.
Macintosh: The setting is selected in the
[Layout] menu of the print window.
(In Mac OS 9.0 to 9.2.2, the setting is
MX-2610N / MX-3110N / MX-3610N