Sharp MX-3610N User Manual page 1155

SETTING MODE
FAX DATA RECEIVE/FORWARD - FAX FUNCTIONS
This section explains settings for fax reception and forwarding.
Fax Settings
Item
Receive Settings
Multiple Set Print
Staple
Forward Received Data
If there is no forwarding data or if the destination is not registered, no data is
forwarded.
If "Hold Setting for Received Data Print" is enabled, you are prompted to enter a
password. Enter the correct password using numeric keys.
If some pages of a fax that is being forwarded were successfully printed, only
those pages that were not printed will be forwarded.
A forwarded fax becomes a fax transmission job. If transmission does not take
place because the transmission was cancelled or an error occurred, the fax will
be held in memory until it can be printed.
All faxes received are forwarded. Note that the received data stored in the F-
code confidential memory box is not forwarded.
For destination number registration, see "Set the Telephone Number for Data
Forwarding" in Setting mode.
Description
Set the fax reception method.
Auto Reception: When a call comes in, the machine rings
and then automatically begins fax reception.
Manual Reception: Used when an existing extension
telephone is connected to the machine. You can answer to
a phone call first, and then receive a fax by manual
operation.
Specify whether or not two or more copies of received faxes will
be printed. The number of copies can be set with the "Fax
Output Settings."
Specify whether or not stapling is performed. (Only when a
finisher is installed)
A binding style can be set with the "Fax Output Settings."
When the machine cannot print because it is out of paper or out
of toner, received faxes can be forwarded to another previously
stored fax machine.
MX-2610N / MX-3110N / MX-3610N