Sharp MX-3610N User Manual page 1137

SETTING MODE
E-MAIL ALERT AND STATUS
E-mail Status
Selects the Standard E-mail Status function or Advanced E-mail Status function settings.
The E-mail Status function can periodically transmit the machine status information to the stored
address.
Standard
Sets the E-mail status address list 1, E-mail status address list 2, and E-mail status dealer
address list separately.
Item
E-mail Address
Send Now
Send on Schedule 1
Send on Schedule 2
Scheduling
Advanced Settings
Bi-directional Status Message Bi-directional status messaging can be enabled.
Item
POP3 Server
Port Number
POP Authentication
User Name
Password
Description
Enter the destination e-mail address for
transmission of machine status information.
When you enter multiple addresses, separate
them by a semicolon (;) or a comma (,).
When tapped, the status message is sent to
the destination of the e-mail address list.
If checked as
according to the preset schedule.
If checked as
according to the preset schedule.
Select a schedule to send E-mails.
Description
Enter the IP address or host name of the POP3 server.
Enter the port number of the POP3 server. The default setting is
port 110.
The authentication protocol (including APOP) is used for
authentication to the POP3 server.
Enter the user name. The special user account is required for bi-
directional e-mail status transmission.
Enter the password.
To change the password, set [Change Password] to
MX-2610N / MX-3110N / MX-3610N
, an E-mail is sent periodically
, an E-mail is sent periodically
.