Sharp MX-3610N User Manual page 1248

TROUBLESHOOTING
A ONE-TOUCH INDIVIDUAL KEY OR GROUP KEY CANNOT BE
EDITED OR DELETED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the key included in a program key?
Have functions been disabled by the
administrator?
Has your administrator enabled a function that
prevents editing/deleting?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Remove the key from the program and then
edit or delete the key. (If the key is included in
multiple programs, it must be removed from all
programs.)
[Call Program] → [Delete] in the action panel
for each mode
If the key is included in multiple programs,
print the Program List in [Sending Address
List] in the setting mode. The list will show
where individual and group keys are stored.
"Setting mode" → [System Settings] → [List
Print (User)] → [Sending Address List] →
[Program List]
Check with your administrator.
Some functions may have been disabled in
the setting mode. Check with your
administrator.
Check with your administrator.
If your administrator has enabled settings
such as [Default Address Setting] and
[Inbound Routing Settings], keys cannot be
edited or removed.
Contents
MX-2610N / MX-3110N / MX-3610N