Sharp MX-3610N User Manual page 1145

SETTING MODE
IPSEC SETTINGS
IPsec can be used for data transmission/reception on a network.
When IPsec is used, data can be sent and received safely without the need to configure
settings for IP packet encryption in a Web browser or other higher-level application.
This setting is only used to enable or disable IPsec; the detailed IPsec settings are configured
with Setting mode (Web version).
This setting is only used to enable or disable IPsec; the detailed IPsec settings are configured
with Setting mode (Web version).
When enabling this settings, take the following notes.
It may take some time to reflect on the machine settings, and you cannot connect to the
machine during this time.
If the Setting mode (Web version) settings are not correctly selected, connection to the
machine may not be allowed, or the settings may not allow printing, scanning, or Setting
mode (Web version) display. In this case, deselect this setting and change the System
Settings (on Web pages).
Index Contents
MX-2610N / MX-3110N / MX-3610N