Sharp MX-3610N User Manual page 1114

SETTING MODE
INTERNET FAX SETTINGS
The Internet Fax functions can be set.
Receive Settings
Internet fax reception
Enables the Internet fax reception functions.
POP3 Server
Enter the IP address or host name of the POP3 server.
Port Number
Enter the port number of the POP3 server. The default setting is port 110.
POP Authentication
The authentication protocol (including APOP) is used for authentication to the POP3 server.
User Name
Enter the user name. The special user account is required for Internet fax reception.
Password
Enter the password.
To change the password, select [Change Password]
text box.
POP3 Communication Timeout
Set a timeout for communication to the POP3 server.
Reception Check Interval Setting
Enter an acknowledge cycle to the POP3 server.
Enable SSL
Allows the POP over SSL communication or the POP over TLS communication by STLS
command. This requires the server to support the POP over SSL communication or the STLS
command.
To allow the POP over SSL communication, set the "Port Number" to the POP over SSL
communication port number.
To allow POP over TLS communication, set the "Port Number" to the same port number as for
the normal POP3 communication.
MX-2610N / MX-3110N / MX-3610N
and enter the new password in the