Sharp MX-3610N User Manual page 1160

Select a number for the first digit and then a number or a hyphen "-" for the second
and third digits.
Fax Send Settings
Settings for fax transmission can be configured.
Auto Reduction Sending Setting
This setting is used to have the size of transmitted faxes automatically reduced to match the
size of the paper in the receiving machine.
If the setting is disabled, faxes are sent at full size. Because the size is not adjusted to match
the size of the printing paper, part of the received fax may be cut off.
Rotation Sending Setting
When transmitting an image that is one of the following sizes, this function rotates the image
90 degrees counterclockwise. (The setting can be configured separately for each size.)
A4, B5R, A5R, 8-1/2"x11", 5-1/2"x8-1/2"R, 16K
A4R and 8-1/2" x 11"R size images are not rotated.
Quick On Line Sending
When this setting is enabled, the machine starts transmitting a fax as soon as the first page is
scanned. Transmission takes place at the same time as the remaining pages are being
scanned.
If you disable this setting, transmission will not begin until all pages have been scanned. Note
that this setting does not apply to manual transmission.
Printing Page Number at Receiver
When the transmitted image is printed by the receiving machine, the page number can be
added to the top of each printed page.
Sender/Destination Name Change
Allows you to change the destination name and sender fax number if necessary.
Date/Own Number Print Position Setting
This setting determines the position of the date and sender information printed at the top of
faxes by the receiving machine. To have the information printed outside the transmitted
document image, tap the [Outside the Original Image] key. To have the information printed
inside the document image, tap the [Inside the Original Image] key.
For more information on the print position, see "ADDING YOUR SENDER INFORMATION TO
FAXES (Fax own number sending)" in "FAX".
Recall in Case of Line Busy
This program is used to set the number of recall attempts and the interval between recall
attempts when a transmission is not successful due to the line being busy or other reason.