Sharp MX-3610N User Manual page 1218

TROUBLESHOOTING
THE TRANSMITTED FAX IS REDUCED BY THE RECEIVING
FAX MACHINE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Has the rotation sending been set?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Enable "Rotation Sending Setting"
before transmission.
When [Rotation Sending Setting] is not
enabled (the image is not rotated), an original
placed in the vertical orientation may be
reduced by the receiving machine.
"Setting mode" → [System Settings] → [Image
Send Settings] → [Fax Settings] → [Send
Settings] → [Rotation Sending Setting]
If "Mixed Size Original" is enabled in Others
and an original with a different width is sent,
rotate transmission will be disabled.
Contents
MX-2610N / MX-3110N / MX-3610N