2-Sided Print
Colour Mode
*3
N-Up Print
*6
Fit To Page
Output
Quick File
*1
When the finisher is installed
*2
This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized
uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a
width of 1 dot.
1-Sided
2-Sided (Booklet)
2-Sided (Tablet)
Auto
B/W
N-Up
1-Up
2-Up
4-Up
8-Up
Layout
*4
Left To Right
*4
Right To Left
Upper-Left To Right
Upper-Left To Lower
Upper-Right To Left
Upper-Right To Lower
(Use Fit to Page)
(Do not use Fit to Page)
(Use Print per Unit)
(Do not use Print per Unit)
*1
Staple Position
: None, 1 Staple at Back, 2 Staples, 2
Staples (Top)
*7
(Use Punch)
(Do not use Punch)
(Disabled)
(Enabled)
*5
*5
*5
*5
*7