Sharp MX-3610N User Manual page 1028

When user authentication is enabled and a display language is specified in the
favourite operation group, that setting is given priority.
Default Display Settings
Set the screen that appears after auto clear and login.
You can select from Copy, E-mail, Network Folder, FTP/Desktop, Internet Fax, Fax, Data
Entry, Address Book, Document Filing, Home Screen, or the Sharp OSA Screen
* When the application communication module is installed.
Disabling of Job Priority Operation
The job priority function can be disabled. When this is done, the [Priority] key will not appear in
the job status screen.
Disabling of Bypass Printing
This setting is used to disable bypass printing (printing other jobs ahead of a job that has been
*
stopped because the paper required for the job is not available in any of the trays).
* This does not include cases where the paper ran out during the job.
Key Operation Setting
This setting determines how long a key in the touch panel must be tapped until the key input is
registered. The time can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented when a key is tapped accidentally.
Keep in mind, however, that when a longer setting is selected more care is required when
tapping keys to ensure that key input is registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously not only each time the key is tapped but
while a key is tapped.
Long-touch Detection Time
Select a time when a long key touch is detected.
Double Tap Speed Interval
Select an interval when a double tap is detected.
Disabling of Clock Adjustment
Disables the date and time from being changed.
Disabling of Covers/Inserts Mode
Disables the use of the covers and inserts function.
*
.