Sharp MX-3610N User Manual page 1049

Enable Network Port
Enables printing from the network port.
Network Port Emulation Switching
This setting is used to select the emulated printer language when the machine is connected by
a network port.
The following settings can be configured.
Auto
*
Post Script
PCL
* When the PS3 expansion kit is installed.
The settings are the same as those of "USB Port Emulation Switching".
Unless printer errors occur frequently, it is recommended that you use the factory
default setting "Auto".
Port Switching Method
Selects when port switching takes place.
Switch at End of Job
The port changes to auto selection when printing ends.
Switch after I/O Timeout
When the time set in "I/O Timeout" elapses, the port changes to Auto Selection.
The following two print ports are available on the machine:
USB port
Network port
Index Contents