Sharp MX-3610N User Manual page 1275

TROUBLESHOOTING
PART OF THE IMAGE IS CUT OFF
Point to check
Has the correct paper size been set?
Was the original placed in the correct
position?
Index
Solution
If you are using a non-standard size,
be sure to specify the paper size.
If the size of paper loaded into a tray was
changed, be sure to check the paper size
setting.
"Setting mode" → [Paper Tray Settings] →
[Tray Registration]
If you are using the document glass,
be sure to place the original in the far
left corner of the document glass.
- "DOCUMENT GLASS"
Contents
MX-2610N / MX-3110N / MX-3610N