Sharp MX-3610N User Manual page 1261

Does the message "Call for service. Code:xx-
xx*." appear in the touch panel?
*Letters and numbers appear in xx-xx.
Index
administrator, and temporarily change the
auto login settings in the setting mode.
(Restore the changed settings to their original
state after the problems have been solved.)
Turn on the machine power again.
Make sure that the background colour of the
job status display at the upper right corner of
the touch panel is grey, and press the [Power]
button and then turn the main power switch to
the " " position. Wait at least 10 seconds
and then turn the main power switch to the "
" position. After the main power indicator
colour changes from orange to green, press
the [Power] button.
If the message still appears after switching the
[Power] button and the main power switch off
and on several times, it is likely that a failure
has occurred that requires service. In this
event, stop using the machine, unplug the
power plug, and contact your dealer or
nearest authorised service representative.
(When contacting your dealer or nearest
authorised service representative, inform them
of the displayed error code.)
Contents