Sharp MX-3610N User Manual page 1100

SETTING MODE
PRINT PORT SETTINGS
LPD
Enter a profile expiring date.
LPD Settings
LPD
Set this option to use LPD.
Timeout
Enter a timeout. The default setting is 0 seconds.
Use Banner
Set this option to use the banner. The default setting is "Invalid".
Raw
Raw Print Settings
Raw Print
Set this option to use RAW printing. The default setting is "Valid".
Port Number
Enter a port number. The default setting is port 9100.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Bidirectional
To use bidirectional communication, set to
WSD
WSD Settings
WSD Print
Set this option to use WSD printing.
Use Multicast Discovery
Set this option to use multicast discovery.
When settings are changed, the changes will take effect after the machine is
restarted. To restart the machine, see "TURNING ON THE POWER".
.
MX-2610N / MX-3110N / MX-3610N