Sharp MX-3610N User Manual page 1273

TROUBLESHOOTING
TONER DOES NOT ADHERE WELL OR CREASES APPEAR ON
THE PAPER
Point to check
Are you using paper that is not within the
specifications?
Has the paper type been set correctly?
Is the paper loaded so that printing takes
place on the reverse side?
Index
Solution
Use SHARP-recommended paper.
Using paper that is for other models or special
paper that is not supported may result in
misfeeds, creases, or smudges.
- "SUPPLIES" in "Quick Start Guide"
Set the correct paper type in the tray
settings.
Make sure that the following has not occurred:
Heavy paper is being used, but a paper
type other than heavy paper is selected
in the tray settings. (The image may
disappear if rubbed.)
Paper other than heavy paper is being
used, but heavy paper is selected in the
tray settings. (This may cause creases
and misfeeds.)
"Setting mode" → [Paper Tray Settings] →
[Tray Registration]
Check the front and reverse side of
paper.
Some types of paper such as labels and
transparency films have specific front or
reverse sides. If printing takes place on the
wrong side of label sheets or transparency
film, the toner may not adhere well and a
clear image may not be obtained.
Contents
MX-2610N / MX-3110N / MX-3610N