Sharp MX-3610N User Manual page 1126

SETTING MODE
E-MAIL PRINT SETTINGS
When an e-mail is sent to the address of this machine, a file attached to this mail is printed
out.
Item
E-mail Print
POP3 Server
Port Number
POP Authentication
User Name
Password
Check Interval
Enable SSL
Connection Test
Index
Description
Select this option to use the E-mail printing.
Enter the IP address or host name of the
POP3 server.
Enter the port number of the POP3 server.
The default setting is port 110.
The authentication protocol (including APOP)
is used for authentication to the POP3 server.
Enter the user name. The special user
account is required for e-mail printing.
Enter the password. To change the password,
select [Change Password]
new password in the text box.
Enter the polling interval for the POP3 server.
The default setting is five minutes.
If set to , the POP over SSL
communication or the POP over TLS
communication by STLS command is
enabled. This requires the server to support
the POP over SSL communication or the
STLS command.
To allow the POP over SSL communication,
set the "Port Number" to the POP over SSL
communication port number.
To allow POP over TLS communication, set
the "Port Number" to the same port number
as for the normal POP3 communication.
Tap the [Execute] button to test the
connection to the POP3 server.
Contents
MX-2610N / MX-3110N / MX-3610N
and enter the