Sharp MX-3610N User Manual page 1197

TROUBLESHOOTING
PRINTING DOES NOT TAKE PLACE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is your PC connected correctly to the
machine?
Is the machine connected to the same
network (LAN, etc.) as your PC?
Is the IP address selected correctly?
(Windows)
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Make sure that the cable is
connected securely to the LAN
connector or the USB port of your PC
and that of the machine.
If you are connected to a network, make sure
that the LAN cable is securely connected to
the hub as well.
- "SIDE AND BACK" in OPERATIONS
COMMON TO ALL MODES
The machine must be connected to
the same network as your PC.
If you do not know which network the
machine is connected to, ask the network
administrator.
Check the IP address setting.
If the machine does not have a permanent IP
address (the machine receives an IP address
from a DHCP server), printing will not be
possible if the IP address changes.
Print the "All Custom Setting List" in the
setting mode and check the IP address of the
machine. If the IP address has changed,
change the port setting for the printer driver.
"Setting mode" → [List Print (User)] → [All
Custom Setting List]
See: Software Setup Guide
If the IP address changes frequently, it is
recommended that a permanent IP address
MX-2610N / MX-3110N / MX-3610N