Figure 193. Configuring Qos Profile Of A Specific Terminal - Samsung WEC8500 Operation Manual

3
4
5
Configuration using Web UI
In the menu bar of <WEC Main window>, select <CONFIGURATION> and then select
the <WIRELESS>  <User QoS> menu in the sub-menus. To create a QoS profile to
apply to a terminal, click the <Add> button in the initial window.
The QoS addition window consists of the following QoS parameters. By entering each
QoS parameter, you can configure the QoS profile of a specific terminal or configure the
usage control function for each user.
Figure 193. Configuring QoS Profile of a Specific Terminal
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
o ac [AC] [802.1P_TAG] [DSCP_TAG]
Parameter
AC
802.1P_TAG
DSCP_TAG
Configure the brief information of a profile.
o description [DESCRIPTION]
Parameter
DESCRIPTION
Configure maximum allowed 802.1p priority value used in the Traffic
Identifier (TID) field of AP QoS packet.
o max-dot1p <802.1p tag>
Parameter
802.1P_TAG
To check the configured QoS profile information, use the 'show qos
profile' command.
ID: ID (range: 1-16)
Description
Access Category (AC_VO/AC_VI/AC_BE/AC_BK)
802.1p configuration (range: 0-7)
DSCP tag configuration (range: 0-63)
Description
Profile description
Description
Maximum allowed 802.1p configuration (range: 0-7)
272