Figure 73. Igmp Snooping Config Window; Figure 74. Igmp Snooping Mroute Creation Window (1); Figure 75. Igmp Snooping Mroute Creation Window (2) - Samsung WEC8500 Operation Manual

Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Multicast>  <IGMP Snooping> menu in the sub-menus.
[Config]
Enables or disables the IGMP Snooping function or configures related functions.
To perform configuration for STATE, FAST LEAVE, QUERIER STATE, or REPORT
SUPRESSION STATE, select Enable or Disable and click the <Apply> button.
Figure 73. IGMP Snooping Config Window
[Mroute]
The PIM-SM initial window is shown below. When you click the <Add> or <Delete>
button, you can add or delete PIM-SM configuration.
Figure 74. IGMP Snooping Mroute Creation Window (1)
1
2
Figure 75. IGMP Snooping Mroute Creation Window (2)
3
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
In the PIM-SM initial window, click the <Add> button.
Click the <Select Vlan> button.
Select a VLAN interface that will be added to the Mroute.
112