Samsung WEC8500 Operation Manual page 332

information is automatically added to the APC list.
1
WEC8500# configure terminal
WEC8500/configure# apc apc-list
WEC8500/configure/apc/apc-list#
2
[Adding APC to cluster]
After adding APC to the APC list, the APC must be added to a cluster.
1
WEC8500# configure terminal
WEC8500/configure#
2
[Deleting APC from cluster]
Delete the APC added in cluster. To delete an APC from a cluster, you must delete the
APC from the cluster configuration of all the APCs in the cluster.
1
WEC8500# configure terminal
WEC8500/configure#
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to apc-list configure mode of CLI.
Add the APC to the APC list.
o add-apc [APC_NAME] [MAC_ADDRESS]
Parameter
APC_NAME
MAC_ADDRESS
Go to the configure mode of the CLI.
Add the APC to a cluster.
o cluster
add-apc
[IP_ADDRESS] [DB_REFRESH_INTERVAL]
Parameter
INDEX
APC_NAME
IP_VERSION
IP_ADDRESS
DB_REFRESH_INTERVAL
Go to the configure mode of the CLI.
Delete an APC from the cluster. To delete all the APC systems in a
cluster, enter the 'cluster del-apc-all' command.
o cluster del-apc [INDEX]
o cluster del-apc-all
Description
APC name to be added to the APC list
MAC address of the APC to be added to the APC list
(system mac address output parameter value of the
'show system info' command in the APC)
[INDEX] [APC_NAME]
Description
Index in cluster (range: 1-12)
APC name (maximum 18 characters)
Version of IP Address (v4/v6)
IP address
Database update interval (Unit: s, range: 60-5000,
default: 120)
[IP VERSION]
313