Figure 203. Sip Alg Configuration Window; Voice Cac Configuration - Samsung WEC8500 Operation Manual

2
APC/configure# sipalg enable
3
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <General> menu in the sub-menus.
Figure 203. SIP ALG Configuration Window
After configuring SIP ALG that is a voice CAC related configuration in the SIP ALG, click
the <Apply> button.

Voice CAC Configuration

To protect existing calls, the voice CAC function configures maximum allowed number of
calls and rejects any call request when the maximum number is exceeded. You can
configure the number of marginal voice calls for handover.
Configuration using CLI
For voice CAC configuration, execute the command as follows:
1
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Enable the SIP ALG.
To check the configuration information, use the 'show sipalg
configuration' command.
Go to configure  voice CAC mode of a wireless section of CLI.
288