Figure 142. Wlan Basic Configuration (2); Wlan Additional Configuration - Samsung WEC8500 Operation Manual

Figure 142. WLAN Basic Configuration (2)
You can configure various functions such as interface group and SSID, and so on.
The configurations available in the General tab are as follows:
•
•
•
•
•
•
•

WLAN Additional Configuration

Each wireless terminal can receive a differentiated service according to the WLAN
configuration. The procedure of configuring the WLAN additional function is as follows:
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
INTERFACE GROUP: Configures an interface group.
RADIO AREA: Configures a radio area.
CAPWAP TUNNEL MODE/LOCAL VLAN: Configures the local switching
function.
SUPRESS SSID: Enables or disables the function.
AAA OVERRIDE: If the WLAN is enabled with the device authentication
function using an AAA server, the AAA-override function can be enabled
so that the user-specific settings configured in the AAA server are
applied with priority over the APC settings.
MAXIMUM ALLOWED STATIONS: Limits the number of users per
WLAN.
ADMIN STATUS: Enables or disables the function.
Go to configure  wlan configuration mode of CLI.
If the WLAN is enabled with the device authentication function using an
AAA server, the AAA-override function can be enabled so that the user-
specific settings configured in the AAA server are applied with priority
204