Figure 169.
Primary/Secondary Server Configuration (2)
After unchecking the GLOBAL USE checkbox in the DHCP part, configure PRIMARY
DHCP SERVER and 'SECONDARY DHCP SERVER' and then click the <Apply> button.
[Configuration at Global]
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<DHCP> <Proxy> menu in the sub-menus.
Configure the PRIMARY SERVER and SECONDARY SERVER of the Global Parameter.
If you does Global configuration, the configuration is applied to all the interfaces whose
'GLOBAL USE' checkbox is checked in the DHCP configuration of APC interface.
Figure 170.
Primary/Secondary Server Configuration (3)
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
248