WEC8500/configure# router ospf ?
1 - 10
2
WEC8500/configure# router ospf ?
1 - 10
WEC8500/configure# router ospf 2
WEC8500/configure/router/ospf 2#
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller> <Network> <OSPF> <General> menu in the sub-menus.
The OSPF initial window is shown below.
Figure 55.
OSPF Configuration Window
Click the <Add> button and configure the PROCESS ID to 1-10 in the below screen.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure# router ospf
WEC8500/configure# router ospf ?
1 - 10
WEC8500/configure# router ospf 2
WEC8500/configure/router/ospf 2#
2
WEC8500/configure/router/ospf 2# ?
area
auto-cost
bandwidth
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
OSPF process ID
Configure the process ID from 1 to 10.
OSPF process ID
Parameter
OSPF process ID
Go to configure ospf configuration mode of CLI.
OSPF process ID
The detail configuration items of a process ID are as follows:
OSPF area parameters
Calculate OSPF interface cost according to
Description
Configure the process ID from 1 to 10.
62