Upgrade - Samsung WEC8500 Operation Manual

Upgrade

The APC provides the upgrade function and version checking function that applies a new
version of package when it is distributed.
Checking Package Version
You can check the version of a current system by using the following command.
•
The following shows the execution results of the command:
WEC8500# show version
Samsung package version information
Primary (currently running)
ver : 1.4.4.R
buildTime : Fri Sep
builder : apcbuild
buildDir : /home2/apcbuild/release/wec8500_1.4.4
Backup
ver : 1.4.4.R
buildTime : Fri Sep
builder : apcbuild
buildDir : /home2/apcbuild/release/wec8500_1.4.4
Boot rom version information
ver : GC15
System Upgrade
The APC does system upgrade using CLI and Web UI.
Configuration using CLI
Apply a new package to the system by using the following command.
1
WEC8500# configure terminal
WEC8500/configure#
2
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
show version
6 06:08:35 2013
6 06:08:35 2013
Go to the configure mode of the CLI.
Perform upgrade by using a package.
o package upgrade [FILE_NAME]
Parameter Description
FILE_NAME Package file to upgrade
The package must be located in the /user/package directory.
A usage example is provided below. When the upgrade is completed,
the system is rebooted to apply the package.
When executing the package upgrade command, the message
recommending saving the configuration file is displayed.
If you save the current configuration, operator can use it for any future
470