Configuring Remote Ap Group; Figure 107. Advanced Configuration Window For Ap Group - Samsung WEC8500 Operation Manual

Figure 107. Advanced Configuration Window for AP Group

Configuring Remote AP Group

If the APs are located in an area where the APC is not located, those APs must be
classified into a separate group for service. The APC can manage the APs in another area
by grouping them into a remote AP group.
In the Remote AP group, the operator can configure the below information and the APs
in the Remote AP group are operating based on the same configuration.
•
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Addition/Deletion of Remote AP
o Possible to add or delete APs to be included in the remote AP group.
158