in the submenu, and then select an AP group to configure. Under the 'APs' tab of the AP
group, APs can be added or removed.
Figure 101.
AP Add/Remove Window for AP Group
Adding/Removing WLANs
To allow the same WLAN services to be provided to the APs allocated to each group, the
APC allows addition/removal of WLANs to/from each AP group.
Configuration using CLI
1
WEC8500# configure terminal
WEC8500/configure#
2
3
4
WEC8500/WEC8050 (APC) Operation Manual v10.1
©Samsung Electronics America
Go to the configure mode of the CLI.
Create an AP group or enter the AP group configuration mode.
o ap-group [AP_GROUP_NAME]
Add/remove a WLAN to/from the AP group. Use 'no' parameter in front
of the command to delete a WLAN from the AP group.
o add-wlan [WLAN_ID]
o no add-wlan [WLAN_ID]
Use the 'show ap-group summary' command to check the AP group
information.
143